User's Manual Part 2

CSM System Time/GPS and LFR/HSO Verification – continued

DRAFT

SCt4812T CDMA BTS Optimization/ATP

Mar 2001

3-40

LFR Initialization/Verification

The LORAN–C LFR is a full size card that resides in the C–CCP Shelf.

The LFR is a completely self-contained unit that interfaces with the

CSM via a serial communications link. The CSM handles the overall

configuration and status monitoring functions of the LFR.

The LFR receives a 100 kHz, 35 kHz BW signal from up to 40 stations

(8 chains) simultaneously and provides the following major functions:

 Automatic antenna pre-amplifier calibration (using a second

differential pair between LFR and LFR antenna)

 A 1 second ±200 ηs strobe to the CSM

If the BTS is equipped with an LFR, follow the procedure in Table 3-20

to initialize the LFR and verify proper operation as a backup source for

the GPS.

If CSMRefSrc2 = 2 in the CDF file, the BTS is equipped

with an LFR. If CSMRefSrc2 = 18, the BTS is equipped

with an HSO.

NOTE

. . . continued on next page