User's Manual Part 2

Download the BTS – continued

Mar 2001

3-29

SCt4812T CDMA BTS Optimization/ATP

DRAFT

Download Code and Data to

Non–MGLI2 Devices

Non–MGLI2 devices can be downloaded individually or all equipped

devices can be downloaded with one action. Follow the procedure in

Table 3-13 to download code and data to the non–MGLI2 devices.

When downloading multiple devices, the download may

fail for some of the devices (a time out occurs). These

devices can be downloaded separately after completing the

multiple download.

NOTE

Table 3-13: Download Code and Data to Non–MGLI Devices

 Step Action

1 Select all devices to be downloaded.

2 From the Device pull down menu, select Download Code.

A status report displays the result of the download for each selected device.

Click OK to close the status window.

NOTE

After the download has started, the device being downloaded changes to blue. If the download is

completed successfully, the device changes to yellow (OOS-RAM with code loaded).

After a BBX, CSM or MCC is successfully downloaded with code and has changed to

OOS-RAM, the status LED should be rapidly flashing GREEN.

3 To download the firmware application data to each device, select the target device and select:

Device>Download Data

Select CSM Clock Source

A CSM can have three different clock sources. The Clock Source

function can be used to select the clock source for each of the three

inputs. This function is only used if the clock source for a CSM needs to

be changed. The Clock Source function provides the following clock

source options:

 Local GPS

 Remote GPS

 HSO (only for sources 2 & 3)

 LFR (only for sources 2 & 3)

 10 MHz (only for sources 2 & 3)

 NONE (only for sources 2 & 3)

Prerequisites

MGLI=INS_ACT

CSM= OOS_RAM or INS_ACT

. . . continued on next page