User's Manual Part 2

Using CDMA LMF – continued

DRAFT

Mar 2001

3-25

SCt4812T CDMA BTS Optimization/ATP

Establishing an MMI

Communication Session

For those procedures that require MMI communications between the

LMF and BTS FRUs, follow the procedure in Table 3-11 to initiate the

communication session.

Table 3-11: Establishing MMI Communications

Step Action

1 Connect the LMF computer to the equipment as detailed in the applicable procedure that requires the

MMI communication session.

2 Start the named HyperTerminal connection for MMI sessions by double clicking on its desktop

shortcut.

NOTE

If a desktop shortcut was not created for the MMI connection, access the connection from the Start

menu by selecting:

Programs>Accessories>Hyperterminal>HyperTerminal><Named HyperTerminal Connection

(e.g., MMI Session).

3 Once the connection window opens, establish MMI communication with the BTS FRU by pressing

the LMF computer <Enter> key until the prompt identified in the applicable procedure is obtained.

NULL MODEM

BOARD

(TRN9666A)

8–PIN TO 10–PIN

RS–232 CABLE

(P/N 30–09786R01)

RS–232 CABLE

8–PIN

CDMA LMF

COMPUTER

To FRU MMI port

DB9–TO–DB25

ADAPTER

Figure 3-7: CDMA LMF Computer Common MMI Connections

COM1

COM2

FW00687