User's Manual Part 2

Using CDMA LMF – continued

DRAFT

Mar 2001

3-23

SCt4812T CDMA BTS Optimization/ATP

Table 3-9: BTS GUI Logout Procedure

Step Action

1 Click on Select on the BTS tab menu bar.

2 Click the Logout item in the pull–down menu (a Confirm Logout pop–up message appears).

3 Click on Yes or press the <Enter> key to confirm logout.

You are returned to the Login tab.

NOTE

If a logout was previously performed on the BTS from a CLI window running at the same time as the

GUI, a Logout Error pop–up message appears stating the system should not log out of the BTS.

When this occurs, the GUI must be exited and restarted before it can be used for further operations.

4 If a Logout Error pop–up message appears stating that the system could not log out of the Base

Station because the given BTS is not logged in, perform the following actions:

– Click OK.

– Select File>Exit in the window menu bar.

– Click Yes in the Confirm Logout pop–up.

– Click Yes in the Logout Error pop–up which appears again.

5 If further work is to be done in the GUI, restart it.