User's Manual Part 2

Preparing the LMF

Mar 2001

3-7

SCt4812T CDMA BTS Optimization/ATP

DRAFT

Overview

Software and files for installation and updating of the LMF are provided

on CD ROM disks. The following installation items must be available:

 LMF Program on CD ROM

 LMF Binaries on CD ROM

 CDF for each supported BTS (on diskette or available from the

CBSC)

 CBSC File for each supported BTS (on diskette or available from the

CBSC)

The following section provides information and instructions for

installing and updating the LMF software and files.

For the CDMA LMF graphics to display properly, the

computer platform must be configured to display more

than 256 colors. See the operating system software

instructions for verifying and configuring the display

settings.

IMPORTANT

LMF Operating System Installation

Follow the procedure in Table 3-3 to install the LMF operating system.

Table 3-3: LMF Operating System Installation

 Step Action

1 Insert the LMF Program CD ROM into the LMF CD ROM drive.

– If the Setup screen is displayed, go to step 5.

– If the Setup screen is not displayed, proceed to step 2.

2 Click on the Start button.

3 Select Run.

4 In the Open box, enter d:\autorun and click on the OK button.

NOTE

If applicable, replace the letter d with the correct CD ROM drive letter.

. . . continued on next page