User's Manual

Preparing the LMF – continued
May 2000
3-13
SC 4812T CDMA BTS Optimization/ATP
Table 3-7: Creating a Named Hyperlink Connection for MMI Connection
Step Action
5 In the Port Settings tab of the COM# Properties window displayed, configure the RS–232 port
settings as follows:
 Bits per second: 9600
 Data bits: 8
 Parity: None
 Stop bits: 1
 Flow control: None
6 Click OK.
7 Save the defined connection by selecting:
File>Save
8 Close the HyperTerminal window by selecting:
File>Exit
9 Click Yes to disconnect when prompted.
10 Perform one of the following:
 If the Hyperterminal folder window is still open (Win 98) proceed to step 12
 From the Windows Start menu, select Programs > Accessories
11 Perform one of the following:
 For Win NT, select Hyperterminal and release any pressed mouse buttons.
 For Win 98, select Communications and double click the Hyperterminal folder.
12 Highlight the newly created connection icon by moving the cursor over it (Win NT) or clicking on it
(Win 98).
13 Right click and drag the highlighted connection icon to the Windows desktop and release the right
mouse button.
14 From the pop–up menu displayed, select Create Shortcut(s) Here.
15 If desired, reposition the shortcut icon for the new connection by dragging it to another location on the
Windows desktop.
3