User's Manual

Preparing the LMF – continued

May 2000

3-9

SC 4812T CDMA BTS Optimization/ATP

Program and Binaries Update Procedure

Follow the procedure in Table 3-5 to update the LMF program and

binaries.

First Time Installations:

– Install Java Runtime Environment (First)

– Install LMF Software (Second)

– Install BTS Binaries (Third)

– Install/Create BTS Folders (Fourth)

NOTE

If applicable, a separate CD ROM of BTS Binaries may be

available for binary updates.

NOTE

Table 3-5: CD ROM Installation

 Step Action

1 Insert the LMF Program CD ROM into the LMF CD ROM drive.

– If the Setup screen is displayed, follow the instructions provided.

– If the Setup screen is not displayed, proceed to step 2.

2 Click on the Start button.

3 Select Run.

4 In the Open box, enter d:\autorun and click on the OK button.

NOTE

If applicable, replace the letter d with the correct CD ROM drive letter.

5 Follow the instructions displayed in the Setup screen.

Copy CDF Files from CBSC

Before the LMF can execute the optimization/ATP procedures for the

BTS, the correct bts-#.cdf and cbsc-#.cdf files must be

obtained from the CBSC and put in a bts-# folder in the LMF

notebook. This requires copying the CBSC CDF files to a DOS

formatted diskette, and using the diskette to install the CDF file in the

LMF.

. . . continued on next page