User's Manual

Index – continued
May 2000
SC 4812T CDMA BTS Optimization/ATP
Index-5
No GLI2 Control through span line connection,
Troubleshooting, 6-15
No GLI2 Control via LMF, 6-15
No or missing MCC24 channel elements, 6-17
No or missing span line traffic, 6-16
Non–MGLI2, Download, 3-24
Null Modem Cable, 3-30
O
Online Help, Help, 1-2
Optimization
Process, 3-1
purpose, 1-3
Optional Test Equipment, 1-9
frequency counter, 1-9
Oscilloscope, 1-10
P
PA Shelves, 1-13
path
RX, 1-3
TX, 1-3
PCMCIA, Ethernet adapter, LMF to BTS connection,
3-5
Pilot Offset Acceptance test, 4-9
Pilot Time Offset, 4-9
Pin/Signal Information for ARM A Cable, 3-86
Ping, 3-15
PN Offset
programming information, B-1
usage, B-1
PnMask, B-2
Power Input, 6-13
Power Meter, 1-8
Power Meter Communication Failure,
Troubleshooting, 6-2
Power Supply Module Interface, 6-14
Pre–power tests, test data sheets, A-3
Preliminary operations
cell Site types, 2-1
test data sheets, A-2
Prepare to Leave the Site
external test equipment removal, 5-1
LMF Removal, 5-7
re–connect BTS IFM connector, 5-8
re–connect BTS T1 spans, 5-8
Reestablish OMC–R control, 5-8
Verify T1/E1, 5-8
Product Description, CDMA LMF, 1-2
Pushbuttons and Connectors, GLI, 6-24
PWR/ALM and ACTIVE LEDs, MCC, 6-25
PWR/ALM LED
BBX2, 6-25
CSM, 6-21
DC/DC Converter, 6-20
generic, 6-20
MCC, 6-25
R
Re–connect BTS IFM connector, 5-8
Re–connect BTS T1 Spans, 5-8
Redundant GLIs, Enable, 3-27
Reestablish OMC–R control, 5-8
Reference Distribution Module (RDM) Input/Output,
6-13
Required documents, 1-11
RESET Pushbutton, GLI, 6-24
Resetting BTS modules, 5-2
RF
Adapters, 1-9
Attenuators, 1-9
Load, 1-9
RF Path Calibration, 3-63
RFDS
Calibration, 3-78
DC Distribution Pre–test, 2-11
Description, 3-71
initial power–up, 2-14
Layout, 1-31
Parameter Settings, 3-72
Set Configuration Data, 3-77
rho test, 4-8
RS–232 to GPIB Interface, RS–232 to GPIB
Interface, 1-7