User's Manual

Required Test Equipment – continued

SC 4812T CDMA BTS Optimization/ATP

May 2000

1-6

Test Equipment Specifications

Test equipment specification requirements for the test equipment (or

configuration of test equipment) used to make up the general test

equipment (DVM, etc) are given in the following paragraphs.

LMF Hardware Requirements

Motorola recommends an LMF computer platform that meets the

following requirements:

 Notebook computer

 266 MHz (32–bit CPU) processor

 4 GB internal hard disk drive

 Color display with 1024 x 768 (recommended) or 800 x 600 pixel

resolution

 64 MB RAM

 CD ROM drive

 3 1/2 inch floppy drive

 Serial port (COM 1)

 Parallel port (LPT 1)

 PCMCIA Ethernet interface card (for example, 3COM Etherlink III)

with a 10Base–T–to–coax adapter

 Windows 98/NT operating system

Test Equipment List

The following pieces of test equipment are required during the

optimization procedure. Common assorted tools like screwdrivers and

frame keys are not listed but are still required. Read the owner’s manual

on all of the following major pieces of test equipment to understand their

individual operation prior to use in optimization.

Always refer to specific OEM test equipment

documentation for detailed operating instructions.

NOTE

Ethernet LAN Transceiver

 PCMCIA Ethernet Adpater + Ethernet UTP Adapter: 3COM Model –

Etherlink III 3C589B

. . . continued on next page