User's Manual

Prepare to Leave the Site – continued
May 2000
5-7
SC 4812T CDMA BTS Optimization/ATP
Table 5-6: Procedures to Copy CAL Files from Diskette to the CBSC
 ActionStep
4 Type mount and press the <Enter> key.
Verify that floppy/no_name is displayed.
NOTE
If the eject command has been previously entered, floppy/no_name will be appended with a
number
. Use the explicit floppy/no_name reference displayed.
5 Enter cd /floppy/no_name and press the <Enter> key.
6 Enter ls –lia and press the <Enter> key. Verify that the bts–#.cal file is on the disk.
7 Enter cd and press the <Enter> key.
8 Enter pwd and press the <Enter> key.
Verify that you are in your home directory (/home/<name>).
9 Enter dos2unix /floppy/no_name/bts–#.cal bts–#.cal and press the <Enter> key (where # is the
BTS number).
10 Enter ls –l *.cal and press the Enter key.
Verify that the CAL file was successfully copied.
11 Type eject and press the <Enter> key.
12 Remove the diskette from the workstation.
LMF Removal
DO NOT power down the LMF without performing the
procedure indicated below. Corrupted/lost data files may
result, and in some cases, the LMF may lock up.
CAUTION
Follow the procedure in Table 5-7 to terminate the LMF session and
remove the terminal.
Table 5-7: LMF Termination and Removal
 Step Action
1 From the CDMA window select File>Exit.
2 From the Windows Task Bar click Start>Shutdown.
Click Yes when the Shut Down Windows message appears.
3 Disconnect the LMF terminal Ethernet connector from the BTS cabinet.
4 Disconnect the LMF serial port, the RS-232 to GPIB interface box, and the GPIB cables as
required for equipment transport.
5