User's Manual

Automated Acceptance Test Procedure – All–inclusive TX & RX – continued

SC 4812T CDMA BTS Optimization/ATP

May 2000

4-4

Table 4-1: ATP Test Procedure

 ActionStep

4 Enter the appropriate channel number in the Carrier n Channels box.

The default channel number displayed is determined by the CdmaChans[n] number in the

cbsc–n.cdf file for the BTS.

5 Click on the OK button.

The status report window and a Directions pop-up are displayed.

6 Follow the cable connection directions as they are displayed.

The test results are displayed in the status report window.

7 Click on Save Results or Dismiss.

NOTE

If Dismiss is used, the test results will not be saved in the test report file.