User's Manual

RFDS Setup and Calibration – continued

SC 4812T CDMA BTS Optimization/ATP

May 2000

3-76

Set Antenna Map Data

The antenna map data is only used for RFDS tests and is required if an

RFDS is installed. Antenna map data does not have to be entered if an

RFDS is not installed. The antenna map data must be entered manually.

Perform the procedure in Table 3-41 to set the Antenna Map Data.

Prerequisite

 Logged into the BTS

Table 3-41: Set Antenna Map Data

Step Action

1 Click on the Util menu.

2 Select Edit>Antenna Map>TX or RX.

A data entry pop–up window appears.

3 Enter/edit values as required for each carrier.

NOTE

Refer to the Util >Edit–antenna map LMF help screen for antenna map examples.

4 Click on the Save button to save displayed values.

NOTE

Entered values are used by the LMF as soon as they are saved. You do not have to logout and login.

5 Click on the Dismiss button to exit the window.

NOTE

Values entered/changed after using the Save button are not saved.