User's Manual

Bay Level Offset Calibration – continued
SC 4812T CDMA BTS Optimization/ATP
May 2000
3-62
– The second breakdown of the array is per sector. Configurations
supported are Omni, 3–sector or 6–sector.
Table 3-31: BTS.cal File Array (Per Sector)
BBX2 Sectorization TX RX RX Diversity
Slot[1] (Primary BBX2s 1 through 12)
1 (Omni)
3–Sector
,
C[1]–C[20] C[241]–C[260] C[481]–C[500]
2
3
–
Sector
,
1st
Ci
C[21]–C[40] C[261]–C[280] C[501]–C[520]
3
6 Sector,
1st
Carrier
C[41]–C[60] C[281]–C[300] C[521]–C[540]
4
1
st
Carrier
3–Sector
,
C[61]–C[80] C[301]–C[320] C[541]–C[560]
5
Carrier
3
–
Sector
,
3rd
Ci
C[81]–C[100] C[321]–C[340] C[561]–C[580]
6
Carrier
C[101]–C[120] C[341]–C[360] C[581]–C[600]
7
3–Sector
,
C[121]–C[140] C[361]–C[380] C[601]–C[620]
8
3
–
Sector
,
2nd
Ci
C[141]–C[160] C[381]–C[400] C[621]–C[640]
9
6 Sector,
2nd
Carrier
C[161]–C[180] C[401]–C[420] C[641]–C[660]
10
2
n
d
Carrier
3–Sector
,
C[181]–C[200] C[421]–C[440] C[661]–C[680]
11
Carrier
3
–
Sector
,
4th
Ci
C[201]–C[220] C[441]–C[460] C[681]–C[700]
12
Carrier
C[221]–C[240] C[461]–C[480] C[701]–C[720]
Slot[20]] (Redundant BBX2–13)
1 (Omni)
3–Sector
,
C[1]–C[20] C[241]–C[260] C[481]–C[500]
2
3
–
Sector
,
1st
Ci
C[21]–C[40] C[261]–C[280] C[501]–C[520]
3
6 Sector,
1st
Carrier
C[41]–C[60] C[281]–C[300] C[521]–C[540]
4
1
st
Carrier
3–Sector
,
C[61]–C[80] C[301]–C[320] C[541]–C[560]
5
Carrier
3
–
Sector
,
3rd
Ci
C[81]–C[100] C[321]–C[340] C[561]–C[580]
6
Carrier
C[101]–C[120] C[341]–C[360] C[581]–C[600]
7
3–Sector
,
C[121]–C[140] C[361]–C[380] C[601]–C[620]
8
3
–
Sector
,
2nd
Ci
C[141]–C[160] C[381]–C[400] C[621]–C[640]
9
6 Sector,
2nd
Carrier
C[161]–C[180] C[401]–C[420] C[641]–C[660]
10
2
n
d
Carrier
3–Sector
,
C[181]–C[200] C[421]–C[440] C[661]–C[680]
11
Carrier
3
–
Sector
,
4th
Ci
C[201]–C[220] C[441]–C[460] C[681]–C[700]
12
Carrier
C[221]–C[240] C[461]–C[480] C[701]–C[720]
 Ten calibration points per sector are supported for each branch. Two
entries are required for each calibration point.
 The first value (all odd entries) refer to the CDMA channel
(frequency) the BLO is measured at. The second value (all even
entries) is the power set level. The valid range for PwrLvlAdj is from
2500 to 27500 (2500 corresponds to –125 dBm and 27500
corresponds to +125 dBm).
. . . continued on next page
3