User Manual

Preparing the LMF – continued
08/15/2000
3-15
SC 4812ETL BTS Optimization/ATP
PRELIMINARY
Folder Structure Overview
The CDMA LMF uses a wlmf folder that contains all of the essential
data for installing and maintaining the BTS. The following list outlines
the folder structure for CDMA LMF. Except for the bts-nnn folders,
these folders are created as part of the CDMA LMF installation.
Figure 3-3: CDMA LMF Folder Structure
version folder (A separate folder is
required for each different version; for
example, a folder name 2.8.1.1.1.5.)
loads folder
(C:)
wlmf folder
cdma folder
code folder
data folder
BTS–nnn folders (A separate folder is
required for each BTS where bts–nnn is the
unique BTS number; for example, bts–163.)
wlmf Folder
The wlmf folder contains the CDMA LMF program files.
cdma Folder
The cdma folder contains the bts–nnn folders and the loads folder. It also
contains a default cbsc–1.cdf file that can be copied to a bts–nnn folder
for use, if one cannot be obtained from the CBSC (Centralized Base
Station Controller) when needed.
bts–nnn Folders
Each bts–nnn folder contains a CAL file, a CDF file and a cbsc file for
the BTS. Other files required by CDMA LMF may also be located in the
bts–nnn folder. A bts–nnn folder must be created for each BTS that is to
be logged in to. The bts–nnn folder must be correctly named (for
example: bts–273) and must be placed in the cdma folder. Figure 3-4
shows an example of the file naming syntax for a BTS folder.
3