User Manual

Required Test Equipment and Software – continued
PRELIMINARY
SC 4812ETL BTS Optimization/ATP
08/15/2000
1-8
Communications system analyzer CDMA/analog
The following communications system analyzers are supported by the
LMF:
S Motorola CyberTest
S Advantest R3465 Analyzer with R3561L Signal Generator
S Hewlett Packard Model HP 8921A/600 Analyzer including 83203B
CDMA Interface, manual control system card, and 83236A/B PCS
Interface for 1900 MHz BTSs.
S Hewlett Packard Model HP 8935 Analyzer
or a combination of test equipment supported by the CDMA LMF and
used during optimization and testing of the RF communications portion
of BTS equipment.
The analyzer provides the following functions:
S Frequency counter.
S Deviation meter.
S RF power meter (average and code domain).
S RF signal generator (capable of DSAT/CDMA modulation).
S Audio signal generator.
S AC voltmeter (with 600–ohm balanced audio input and high
impedance input mode).
S Noise measurement meter.
S C–Message filter.
S Spectrum analyzer.
S CDMA code domain analyzer.
GPIB cables
Hewlett Packard 10833A or equivalent; one or two meters long, used to
interconnect test equipment and CDMA LMF terminal.
Power meter
S Hewlett Packard Model HP437B with HP8481A power sensor capable
of measuring from –30 dBm to 20 dBm,
or
S Gigatronics 8542B power meter.
1