Installation Instructions

List of Tables – continued
DEC 2000
xiii
SCt300 BTS Hardware Installation, ATP and FRU Procedures
PRELIMINARY
Table 5-7: Procedure to Install AC Input Cable(s) on a
BTS Equipped with Optional Primary Surge Suppressor 5-15. . . . . . . . . . . . . . . . .
Table 5-8: Procedure to Install DC Input Cable(s) 5-17. . . . . . . . . . . . . . . . . . . . . . .
Table 5-11: Cables Needed for Antenna Connections 5-18. . . . . . . . . . . . . . . . . . . .
Table 5-12: Pin and Signal Information for Cables C and D (Antenna Cable) 5-18.
Table 5-13: Procedure to Install Antenna Cabling for Sites Equipped with
Primary Surge Suppressor 5-19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 5-12: Cables Needed for Antenna Connections 5-24. . . . . . . . . . . . . . . . . . . .
Table 5-13: Procedure to Install Site I/O Cable Between Site I/O Junction Box and
Optional Primary Surge Suppressor 5-25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 5-14: Pin/Signal Information for Site I/O Cable and Punchdown Block 5-28.
Table 5-15: Connecting the RGPS to the Site I/O Cable 5-30. . . . . . . . . . . . . . . . . .
Table 5-18: Cable Descriptions and Part Numbers 5-32. . . . . . . . . . . . . . . . . . . . . . .
Table 5-19: RGPS Synchronization Cable Kit – SGKN4351A 5-32. . . . . . . . . . . .
Table 5-20: RGPS Synchronization Cable Kit – SGKN4352A 5-32. . . . . . . . . . . .
Table 5-21: Multi–BTS RGPS Cable Run List for Primary Surge Suppressor 5-36.
Table 5-20: Cable Descriptions and Part Numbers 5-37. . . . . . . . . . . . . . . . . . . . . . .
Table 5-21: Cable Run List for Span Line Daisy Chain Cabling 5-39. . . . . . . . . . . .
Table 6-1: Procedure to Attach Rear Fin Cover to Units 6-5. . . . . . . . . . . . . . . . . .
Table 6-2: Installation Handle Kit – SGLN5754 6-6. . . . . . . . . . . . . . . . . . . . . . . .
Table 6-3: Procedure to Attach the Installation Handles to the Unit 6-6. . . . . . . . .
Table 6-4: Procedure to Attach the Unit to the Mounting Bracket 6-9. . . . . . . . . . .
Table 6-5: Ground Cable Description and Part Number 6-11. . . . . . . . . . . . . . . . . . .
Table 6-6: Procedure to Attach the Earth Ground Cables 6-11. . . . . . . . . . . . . . . . .
Table 6-7: Procedure to Attach Front Fin Cover to Unit 6-14. . . . . . . . . . . . . . . . . .
Table 6-8: Procedure to Attach the Site I/O Junction Box to the Unit 6-15. . . . . . . .
Table 6-9: Procedure to Attach a Site I/O Cap to the Unit (optional) 6-16. . . . . . . .
Table 6-10: Procedure to Attach the Short Duration Battery to the Unit 6-17. . . . . .
Table 6-11: Procedure to Connect the Short Duration Battery Cable to Unit 6-19. .
Table 6-13: AC Input Cable Description and Part Number 6-21. . . . . . . . . . . . . . . .
Table 6-14: Procedure to Connect AC Power to the Unit 6-21. . . . . . . . . . . . . . . . .
Table 6-14: DC Input Cable Description and Part Number 6-23. . . . . . . . . . . . . . . .
Table 6-15: Procedure to Connect DC Power to the Unit 6-23. . . . . . . . . . . . . . . . .
Table 6-17: Cable Descriptions and Part Numbers 6-25. . . . . . . . . . . . . . . . . . . . . . .
Table 6-18: Cable Descriptions and Part Numbers 6-30. . . . . . . . . . . . . . . . . . . . . . .
Table 6-19: Procedure to Install Antenna Lightning Arrestors 6-30. . . . . . . . . . . . . .
Table 6-20: MIB Terminators 6-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Table 6-21: Microcell Expansion Kit for Units 1 to 2
Short MIB A (Cubicle) – T448AL 6-38. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .