Installation Instructions

BTS Software – continued

PRELIMINARY

SCt300 BTS Hardware Installation, ATP and FRU Procedures

DEC 2000

7-26

Device load version in the CDF file does not have to match

the current version loaded at the OMCR/CBSC.

NOTE

Table 7-13: Update BTS Specific CDF File Device Load Version

Step Action

1 Click on the Util menu.

2 Select the Tools menu item.

3 Click on the Update NextLoad device.

4 Select the desired version number (button next to desired version number must be darkened).

5 Click on the Save button. A pop–up message will appear indicating that the CDF file has been

updated.

NOTE

At this point, a backup copy of the original CDF is created with a _bak extension, (e.g.,

bts–812.cdf_bak ).

6 Click on the OK button to dismiss the pop–up message.

Download/Enable MAWI

The objective of this procedure is to download and enable the BTS.

The BTS software platform is based on the Motorola Advanced

Wideband Interface (MAWI). The term MAWI is used to refer to the

Microcell or Picocell from the LMF’s point of view.

The BTS is shipped from the factory with all the software

downloaded. Use the load procedure only when new

software is loaded.

NOTE

Follow the steps outlined in Table 7-14 to download the code and data to

enable the MAWI.

Before the download/enable process, use the status function and verify

the MAWI responds with status information. Use this information to get

the current code loaded in MAWI.