Installation Instructions

Create CAL File – continued

DEC 2000

7-43

SCt300 BTS Hardware Installation, ATP and FRU Procedures

PRELIMINARY

Procedure

Use the following procedure in Table 7-25 to create a CAL file.

Table 7-25: Create CAL File

Step Action

1 Log on to the BTS if you have not already done so.

2 Select the MAWI.

3 Click on the Device menu.

4 Click on the Create Cal File menu item.

The status report window displays the results of the action.

5 Click OK.

The bts–#.cal is located in the wlmf\cdma\bts–#

folder (where # is the number of the BTS).

NOTE