User Manual

6-59
C HAPTER
6
C HAPTER 6 INSTALLING THE CABINET-MOUNTED
BASE
RADIO (CBR)
Chapter overview
This chapter describes how to install the cabinet-mounted base radio (CBR). It describes:
• Installing the cabinet onto a 19 inch rack
• Installing the power supply and switch
• Installing the CBR into the base station cabinet
• Connecting the CBRs to the cell and to cell-site components
Before you begin
Before you install CBRs:
• It is recommended that you assign a name to the CBR. For more information refer to
Chapter 2, “Configuring base stations‚” in this guide.
• It is also a good idea to configure the base station with channel, VLAN, power, and other
parameters, as described in Chapter 2, “Configuring base stations‚” in this guide.