User Manual

Index-85
A
AAA server See AP server
airlink
enabling, 4-38
alarm
triggered on CBR, 6-69
ancilliary equipment
housing requirements, 1-8
antenna
coaxial cable, 5-53
connector, 5-53
gain recommended, 1-8
installation tips, 5-55
lightning protection, 5-53
planning installation, 1-8
type used to transmit MMDS channels, B-
81
AP server
configuring, 3-16
defining users and administrators, 3-16
installing, 3-15
overview, 1-3
setting up redundant, 4-41
starting, 3-15
authority
definitions, 4-40
setting up local authority, 4-42
setting up remote authority, 4-41
AUX +48 VDC connector, 5-50
AUX ETHERNET connector, 5-50
B
backbone network
connecting to, 5-57, 6-74
bandwidth
increasing on the downlink, 4-35
base station
connecting to TVS module, 5-50
connectors, 5-47, 6-69, 6-70
daisy chaining within cell, 5-57, 6-70
mounting, 5-54
power, 5-57, 6-65
setting configuration parameters, 4-33
base stations
starting term session, 3-26
battery backup connector
CBR, 6-66
BTS
installation overview, 1-5
C
cabinet
Ethernet cable connection, 6-72
cable
coaxial cable, 5-53
Ethernet/power, 5-49
GPS inter-base station cable, 5-51, 6-70
GPS interface cable, 5-51, 6-70
serial interface, 5-53
CBR
cell wiring diagram, 6-64
diagnostic cable, 6-71
Ethernet cable connection, 6-72
fuses, 6-72
grounding, 6-68
installation overview, 1-4
installing in cabinet, 6-62
LED locations and meaning, 6-69
overview, 1-2
power cable connectors, 6-71
power connectors, 6-66
power supply requirements, 6-65
wiring to cell, 6-63
cell wiring diagram
for CBR, 6-64
channel number
setting, 4-33
channels
in MMDS frequencies, B-81
coaxial cable, 5-53
jumpers recommended, 5-55
maximum signal loss allowed, 5-55
configuration parameters
setting before deploying base station, 4-33
connector
data, 5-48
Ethernet, 5-48
GPS, 5-51
ISP Ethernet in TVS module, 5-50
power, 5-48
serial interface, 5-53
TVS module, 5-50
connectors
supported by base station, 5-47, 6-70
CPEs
how access is granted, 4-40
I NDEX