User Manual

4 Installing and using the Expedience OSU
4 Connect the power cord to standard household power. Connect the OSU power/Ethernet
cable and the computer’s Ethernet cable to the appropriate jack opening in the dual RJ-45
power supply cord.
5 Adjust the OSU to obtain the strongest service provider signal.
6 Ensure that the computer is set up to automatically obtain an IP address.
7 Connect to the Internet.
Cabling overview
Figure 3 illustrates the routing of the ground wire, the RJ-45 Ethernet cable, and the OSU
power/Ethernet cable.
Note: The ground wire, grounding rod, RJ-45 cable, anti-seize compound for the hex screws,
and computer NIC are not supplied with the system.
Figure 3 Connecting cables overview
Building’s roof
Building’s wall
OSU bracket
mounted to
building's exterior
to grounding rod
(not supplied)
Power supply
Ethernet cable (not supplied)
Subscriber’s 
computer
Ground wire
(not supplied)
OSU power/Ethernet
cable