User Manual

4-30 Configuring, Installing, and Using Carrier Infrastructure
Switching from the primary AP server to the secondary AP
server
To switch from the primary AP server to the secondary AP server:
1 Stop the primary AP server. To do so, from a command prompt on the primary AP server,
type:
net stop Tomcat
2 Start the secondary AP server. To do so, from a command prompt on the secondary AP
server, type:
net start Tomcat
After the primary server is stopped, each base station automatically detects the loss of the
primary connection. The base station then attempts to connect with the secondary AP server.
The secondary server connects to the ISP provisioning servers. Since this connection
overrides any previous connection with the provisioning servers, you must stop the primary
AP server before starting the secondary AP server.