User Manual

ManualsBrandsNokia Solutions and Networks ManualsElectronicsBroadband Wireless Access Base Station

Table Of Contents

Preface Overview
About this guide
- Chapters in this guide
Additional documentation
- How to obtain additional documentation
Typographical conventions this guide uses
Where to go for more help
- Technical support
- Documentation additions and corrections
Chapter overview
System overview
- Base station overview
Installation overview
Planning the installation
- Choosing an installation location
- Assessing service provider equipment needs
- Planning for the antennas and antenna installation tips
Chapter overview
Before you begin
Using Terminal Emulation or Telnet to help configure base stations
- Connecting through Telnet
- Connecting through terminal emulation
  - Terminal emulation connection settings
Setting base station configuration parameters
- set airlink channel number
- set airlink downlink power
- set downlink bias
- set airlink state
Chapter overview
Before you begin
Cell wiring
Base station connectors
- Ethernet (data) and power connector
  - Ethernet/power connecting cable
- TVS module connectors
  - Base station to TVS connector
  - Power supply cable and ISP Ethernet network connector
- GPS connectors
  - GPS connecting cable/Inter-base station connecting cables
- Serial interface connector
  - Serial interface connecting cable
- Antenna connector
Mounting the base station
- Mounting the base station to a wall
- Mounting the base station to a tower
Connecting the antenna to the base station
- Antenna connection tips
- Connecting the antenna to the base station
Connecting the GPS equipment to a base station
- GPS equipment mounting tips
- Connecting the GPS unit to the base station
Connecting to the backbone network
Powering base stations
- Powering tips
- Powering the base station
Verifying system operation
Appendix overview
Appendix overview

3-28 Configuring, Installing, and Using Base Stations

Verifying system operation

Before you leave the cell site, make sure the system is operational. To do so:

1 TBD

2 TBD

3 TBD