Installation Instructions

System Requirements for Installation and Operation
34 (43) © Nokia Corporation DN00283911
Nokia Proprietary and Confidential Issue 2 DRAFT 1 - en
Figure 11. Removing the cover top
3. Remove stains and dust from the surface of the cover with an alcoholic or
acidic wash, or wipe it clean with a piece of cloth moistened with water and
mild washing agent. Do not use washing agents that contain alkalis,
aromatic, chlorinated, or fluorinated hydrocarbons, esters or ketones.
4. Rinse with water to remove any residue of cleaning chemicals.
5. Dry the cover parts by blowing ionized air on them to remove electrostatic
charges and dust particles.
6. Place a support under the cover and the cover top so that you do not have
to touch the parts during painting.
7. Use a clamp or hook for holding the cable cover and the cable cover
support during painting. See Figure for areas on which to place the clamp.