Installation Instructions

Environment
DN00283911 © Nokia Corporation 13 (43)
Issue 2 DRAFT 1 - en Nokia Proprietary and Confidential
Caution
Note
Note
3.2 Transportation
This section defines the environmental conditions which the Nokia InLite can be
exposed to during transportation.
The Nokia InLite must be transported in its original package before the
installation.
The Nokia InLite is delivered to the customer with some of the plug-in units pre-
installed (Control Unit, Power Supply Unit/s, Switch Matrix/Dual Band RF unit).
3.2.1 ETSI standard for transportation
The Nokia InLite is Class 2.3 as defined in ETS 300 019-1-2:1992 the class for
InLite. This applies to transportation by air, road (on all qualities of road surface),
by ship and by train where some care has been taken with respect to temperature.
The typical transportation time is considered to be 30 days or less. When the total
transportation time exceeds 30 days, additional storage or packaging precautions
must be considered.
3.2.2 Climatic conditions for transportation
The climatic conditions during the transportation are presented in Table
(according to ETS 300 019-1-2:1992).
Environmental parameter Value
Low air temperature -40 °C
-40 °F
High temperature, air in unventilated enclosures 70 °C
158 °F
High temperature, air in ventilated enclosures or
outdoor air
40 °C
104 °F
Temperature change air/air -40 °C / +30 °C
-40 °F/ +86 °F