Installation Instructions

Installation
66 (79) © N okia Corporation D N 00203719
N okia Proprietary and C o n f idential I ssue 2 D RAFT 1 - en Status
The main cover and cable cover are shown in Figure .
To fit the Main Unit cable cover support, cable cover and cover
1. Obtain the cable cover support and secure to the bottom right-
h
the MU backplate using the M4 nut and shakeproof washer provid
e
cable cover support is located via a stud on the backplate.
2. Obtain the cable cover and holding the cables such as to allo
w
cover to pass over them, push the cable cover back then down u
n
in position on the cable cover support.
3. Lift the MU plastic cover and carefully slide it over the encl
o
same time ensure that the cable cover locking pieces are alig
n
recesses on the backplate.
4. Ensure that no cables are trapped between the unit and the bac
5. Press the cover in position onto the MU backplate.
6. Push the cover down from the top and at the same time keeping
firmly pressed against the backplate, make sure that the all c
pieces are securely located in the backplate recesses.
7. Insert the locking assembly in position as shown in Figure . U
provided, lock the plastic cover in position.