Installation Instructions
Installation
D N 00203719 © N okia Corporation 63 (79)
I ssue 2 D RAFT 1 - en N okia Proprietary and C o n f idential
Note
Note
5.9 Connecting the RF cables
To connect the RF jumper cables
The RF connectors on the MU connector panel are numbered (1-8)
Do not connect the RF jumper cables to the BTSs until required
Inlite System commissioning phase. For more information, refer Nokia InLite:
Commissioning.
1. Obtain the appropriate number of RF jumper cables (eight m
a
their transportation package. The connectors have angled
c
type).
2. Connect the RF jumper cable to the MU and connect it to t
h
RF connector on the RF panel. Take care not to over bend t
h
tighten the connector.
3. Repeat steps 2 and 3 for the remaining RF jumper cables.
Figure shows two RF cables connected to the RF panel
Figure 33. RF jum per cables connected to the Main Unit
RF jum per
cable
To/from
BT S
Main Unit
RF connector
panel