Installation Instructions

Installation

62 (79) © N okia Corporation D N 00203719

N okia Proprietary and C o n f idential I ssue 2 D RAFT 1 - en Status

Note

8. Connect the antenna cable between the antenna and the RU. Up t

antennas can be connected to the RU. Ensure that the antenna c

neatly routed and secured.

If only one antenna is connected, use a 50 ohm termination for the

connector.

Do not over-tighten the connectors. If N-type connectors are used,

hand is sufficient.

9. Connect the power cable to the RU.

10. Close the enclosure cover and secure it to the backplate using

screws provided.