Installation Instructions

Installation
36 (79) © N okia Corporation D N 00203719
N okia Proprietary and C o n f idential I ssue 2 D RAFT 1 - en Status
1. Bring the MU to the mounting frame and position the L-beam on
t
of the cabinet onto the U-plate.
2. Hang the MU securely on the upper M4 x 20 mm MU fixing screws
and B2 shown in Figure ).
3. Tighten the upper MU fixing screws (B1 and B2 shown in Figure
securely.
4. Tighten the two offset screws (B3 and B4) M6 x 25 mm on the L-b
e
the U-plate from the underside. Use a torque socket spanner/wr
e
6 mm Allen bit, tighten to 12 Nm (8.85 ft/lb).