Installation Instructions

Installation
D N 00203719 © N okia Corporation 33 (79)
I ssue 2 D RAFT 1 - en N okia Proprietary and C o n f idential
C aution
Note
Figure 9. Pole bracket pre-assem bled with metal band
To install the pole bracket and mounting frame onto a pole
Figure shows the manner in which a mounting frame is installe
mm diameter pole.
If a ladder is required to attain the height at which the MU i
s
great care when using the ladder.
Before taking the mounting frame up the pole, carry out the tas
1 to 3 inclusive
1. Insert the two M4 x 20mm MU fixing screws into the upperm
o
holes on the mounting frame (B1 and B2 shown in Figure ).
enough to bear the weight of the MU.
WormScrew
Worm Screw
H ousing
L ocking
R ack
Metal
Band