Installation Instructions

Installation
32 (79) © N okia Corporation D N 00203719
N okia Proprietary and C o n f idential I ssue 2 D RAFT 1 - en Status
Table shows the relationship between the pole diameters and band le
n
T able 8. Band leng ths for different pole diam eters
To pre-assemble the pole brackets
1. Assemble the locking device. Insert the end of the rack into t
h
housing just enough to engage the rack. Make sure that the wo
r
SIDE UP on the rack can be seen.
2. Cut the metal band to the appropriate length according to the p
o
Refer to Table for the different pole diameters / band lengths
3. Route the metal band through the holes in the top front block
4. Bend one end of the metal band about 30 mm (1.2 in) towards the
to form a hook.
5. Insert the hook into the slot at the end of the locking rack.
6. Bend the other end of the metal band about 30 mm (1.2 in) towa
underside to form a hook. Leave it free for now.
Pole Diameter (mm) Band Length (mm)
140 580
160 630
180 680
200 740
220 790
240 850
260 900
280 950
300 1010