Installation Instructions

Installation
D N 00203719 © N okia Corporation 21 (79)
I ssue 2 D RAFT 1 - en N okia Proprietary and C o n f idential
2. Holding the cover firmly and against the chassis assembly,
upwards until the cover locking guides are free of the ba
c
3. Carefully pull the cover off the chassis assembly and sto
r
until required again.
4. Remove the cable cover by carefully lifting until the loc
k
clear of the retention recesses on the cable cover support
Store in a safe place.
5. Pull the plastic cable cover support downwards to disenga
g
backplate.
6. Remove the cable cover support and store it in a safe pla
c
5.2.2 Main Unit mounting frame
The mounting frame is used in both wall and pole installations
base for the MU assembly.
Screw holes and dimensions of the mounting frame are presente
d
Screw holes R1, R2, R3 and R4 are intended for fixing the moun
a wall or onto a pole bracket. The upper MU fixing screws are
i
holes B1 and B2.