Installation Instructions

Installation
14 (79) © N okia Corporation D N 00203719
N okia Proprietary and C o n f idential I ssue 2 D RAFT 1 - en Status
Note
5. Install the MU in its allocated location.
6. Install the LUs into the MU.
7. Check the MU power supply.
8. Identify the RU locations and drill the holes for the RU moun
t
screws.
9. Arrange the power supply at the RU locations.
10. Install the antennas.
11. Arrange/splice the FO pigtails 4 m long to the FO cables betwe
e
RUs at the LU end.
12. Arrange/splice the FO pigtails 2 m long to the FO cables betwe
e
RUs at the RU end.
13. Test the FO cables.
14. Label the FO cables at the RU and LU ends.
15. Mount the RU mounting racks to the supports and mount the RUs.
16. Connect the FO cables to the LUs and RUs.
17. Connect RF antenna cables between the antennas and the RUs.
18. Connect the RF jumper cables to the MU.
19. Connect power supply to the RUs.
20. Switch on the mains power to the MU.
21. Connect the LMP cable between MU and the local management lapt
o
and start the Nokia Inlite System Supervisor Software.
22. Complete the MU and RU placing tables in the Nokia Supervisor
S
23. Start the commissioning process as described in the Nokia InLite:
Commissioning document.
24. Fit the cable cover and the MU cover.
Splicing is not required if used jumpers.