Operation Manual

Table Of Contents

Nokia MetroSite GSM Base Station, Requirements for Installation and Operation

36 (38) © Nokia Networks Oy Internal Copy DN9913471

Issue 1 en DRAFT 2 Draft

Note

Additional equipment includes:

• LMP cable for connecting the manager PC to the BTS

• Antistatic wrist strap

• Spirit level for checking the horizontal level of the BTS

• Tape measure

• Cable ties for routing the cables

• Crimping tool for assembling the power supply cable connector (AC and

DC)

A set of tools needed for assembling the cable connectors is available at Nokia.

• Cable stripper for assembling the power supply cable (AC and DC)

connector

• Screwdriver for assembling the AC cable connector

• Ladder (depending on circumstances on site)

• 10 mm spanner for removing the grounding bridge on the transmission unit

(optional)

• T20 Torx torque driver for removing and tightening the BTS cover top

retaining screws (optional)

• Centre punch for marking drilling hole locations in wall mounting

(optional)