Operation Manual

Installation equipment
DN9913471 © Nokia Networks Oy Internal Copy 35 (38)
Issue 1 en DRAFT 2 Draft
5 Installation equipment
This section specifies the equipment that is recommended for the installation of
the Nokia MetroSite GSM BTS, but not included in the BTS delivery.
Figure 9. Recommended tools for installing the BTS
Side-cutting pliers
- for cutting the cable ties
Torque socket spanner/wrench
(5-20 Nm/3-14 ft-lb) with:
- 6 mm Allen bit
A) for bolts of pole bracket
version 1 (12 Nm/8.85 ft-lb)
B) with 80 mm extension for L-beam
offset screws (12 Nm/8.85 ft-lb)
- 8 mm hexagon socket with
min. 80 mm extension
A) for worm screw on pole bracket
version 2 (10 Nm/7.37 ft-lb)
B) for fixing the grounding nut
(5.5 Nm/4.06 ft-lb)
Torque key
- for diversity cables (1 Nm/.74 ft-lb)
Torque driver (0-6 Nm/0-5 ft-lb) with:
- T10 Torx bit with min. 60 mm shaft
for unit retaining screws
(1.5 Nm/1.11 ft-lb)
- 4 mm Allen bit with min. 60 mm shaft:
A) for BTS fixing screws
(5.5 Nm/4.06 ft-lb)
B) for fixing cable entry
block screws
C) for fixing grounding cable
(5.5 Nm/4.06 ft-lb)