Operation Manual
Table Of Contents
- Nokia MetroSite GSM Base Station, Requirements for Installation and Operation
- 1 About this document
- 2 Environment
- 3 Installation requirements
- 4 Cabinet interfaces and cables
- 5 Installation equipment
Installation requirements
DN9913471 © Nokia Networks Oy Internal Copy 29 (38)
Issue 1 en DRAFT 2 Draft
Figure 6. Removing the cover top
3. Remove stains and dust from the surface of the cover with an alcoholic or
acidic wash, or wipe it clean with a piece of cloth moistened with water and
mild washing agent. Do not use washing agents that contain alkalis,
aromatic, chlorinated, or fluorinated hydrocarbons, esters or ketones.
4. Rinse with water to remove residuals of cleaning chemicals.
5. Dry the cover parts by blowing ionized air on them to remove electrostatic
charges and dust particles.
6. Place a support under the cover and the cover top so that you do not have
to touch the parts during painting.
7. Use a clamp or hook for holding the cable cover and the cable cover
support during painting. See Figure 7 for areas on which to place the clamp.