Operation Manual

Nokia MetroSite GSM Base Station, Requirements for Installation and Operation
20 (38) © Nokia Networks Oy Internal Copy DN9913471
Issue 1 en DRAFT 2 Draft
Note
• For removing units on the right-hand side of the BTS
• For removing the cover above the BTS
• For hanging the cover on the left-hand side of the BTS
• For cables and for cooling under the BTS
In order to hang the cover on the side of the cabinet during installation and
maintenance, a clearance of 250 mm (10 in) is required. This space can be
dispensed with, if the cover can be placed safely elsewhere (for example, on the
floor). In this case, only a clearance of 50 mm (2 in) is required.
Refer to wall mounting instructions in Nokia MetroSite GSM Base Station:
Installation for more information on how to use the template.
3.3 Mounting locations and positions
The Nokia MetroSite GSM BTS can be mounted on a wall or on a pole. Both
indoor and outdoor applicationsare possible. The Nokia MetroSite GSM BTS can
also be mounted horizontally in the position shown in Figure 3. Other horizontal
positions are not permitted.
The space in which the Nokia MetroSite GSM BTS is located must have proper
ventilation.