Operation Manual
Table Of Contents
- Nokia MetroSite GSM Base Station, Requirements for Installation and Operation
- 1 About this document
- 2 Environment
- 3 Installation requirements
- 4 Cabinet interfaces and cables
- 5 Installation equipment
Environment
DN9913471 © Nokia Networks Oy Internal Copy 13 (38)
Issue 1 en DRAFT 2 Draft
Note
2.2.3 Mechanical conditions for transportation
For mechanical conditions during transportation, the Nokia MetroSite GSM BTS
complies with ETS 300 019 1-2:1992 class 2.2.
2.3 Operation
This section defines the environmental conditions during the operation of the
Nokia MetroSite GSM BTS at locations which are not protected from direct
weather influences.
When surveying the prospective sites, consider the values presented in this
section.
Operating conditions are defined as stationary: the equipment is mounted on a
structure, or on a mounting device, or it is permanently placed at a certain site.
The Nokia MetroSite GSM BTS is not intended for portable use.
2.3.1 International standard for operation
According to ETS 300 019-1-4:1992, the class for the Nokia MetroSite BGSM
TS equipment is class 4.1.
2.3.2 Climatic conditions for operation
For climatic conditions during operation, the Nokia MetroSite GSM BTS
complies generally with class 4.1 as presented in Table 3. However, for the
temperature and humidity values, the table presents extended operational climatic
conditions, which differ from class 4.1. The weather shielding of the Nokia
MetroSite GSM BTS is valid when the BTS is mounted in the recommended
positions.