Operation Manual
Table Of Contents
- Nokia MetroSite GSM Base Station, Requirements for Installation and Operation
- 1 About this document
- 2 Environment
- 3 Installation requirements
- 4 Cabinet interfaces and cables
- 5 Installation equipment
Environment
DN9913471 © Nokia Networks Oy Internal Copy 11 (38)
Issue 1 en DRAFT 2 Draft
Caution
Note
Note
2.2 Transportation
This section defines the environmental conditions which the Nokia MetroSite
GSM BTS can be exposed to during transportation.
The Nokia MetroSiteGSM BTS must be transported in its original package before
the installation.
The Nokia MetroSite GSM BTS is delivered to the customer with the ordered
plug-in units preinstalled.
2.2.1 International standard for transportation
According to ETS 300 019-1-2:1992, the class for the Nokia MetroSite GSM
BTS equipment is Class 2.2. This class applies to those cases of transportation
where special care has been taken, e.g. with respect to low temperature and
handling.
The typical transportation time is considered to be 30 days or less. When the total
transportation time exceeds 30 days, additional storage or packaging precautions
must be considered.
2.2.2 Climatic conditions for transportation
The climatic conditions during the transportation are presented in Table 2
(according to ETS 300 019-1-2:1992).