User's Manual

Grounding principle

Modules are grounded.

Check list

1. Connect the grounding cable to the module

front panel.

2. Route the grounding cable through the cable entry.

3. Connect the other end of the cable to the plinth.

4. Repeat steps 1-3 with all the modules.

Tighten to 3.5-4.2 Nm (2.58-3.10 ft-Ib).

Grounding the modules

1. Route the cables through

cable entries.

2. Fix to cable tie points with

cable ties.

Cable clamp

Cabling

Cable routing and cable ties

Cable entry

Ground

Antenna

Wall

Stack

Installation examples

Pole

Wall

Ground

Antenna

Pole

Cable Entry

Grounding connections are tightened to the correct torque values.

Caution: Incorrect cables

and seals may not provide

secured environmental

protection.Use only tested

IP65 class cables with seals

provided by Nokia Siemens

Networks.