User's Manual

31
8. LAN (Local Address) Configuration
If DHCP is enabled on all of the computers in your home network (LAN), you
should not need to change any of the default LAN settings.
Unless you have sufficient networking knowledge, we recommend not changing
any LAN settings.
If you need to verify LAN Configuration, you can access this information by
performing the following:
1 Click the DHCP Server tab on the Home page.
2 Select the one you want to configure from the four: DHCP Server, Lease Status and
Lease Reservation.
D
D
H
H
C
C
P
P
S
S
e
e
r
r
v
v
e
e
r
r
This configuration enables Dynamic Host Configuration Protocol (DHCP) server
functionality on the LAN, allowing the router to dynamically assign lease IP
addresses to clients that connect to it from the local network.