User's Guide

I m portant Safety I nfor m ation Chapt er 7: I m port ant Safet y and Legal I nform ation

I m port a nt Safet y I nform at ion

■■■■■■■■■■■ ■■■■■■■■■■■■ ■■■■■■■■■■■■■ ■■■■■■■■■■■■■ ■■■■■■■■■■■■■

■

Your Motorola WiMAX Wireless Broadband Gateway is designed and tested to comply with a

number of national and international standards and guidelines (listed below) regarding human

exposure to RF electromagnetic energy.

This Product com plies w it h the follow ing RF ener gy exposure

st a ndards a nd guideline s:

• United States Federal Communications Commission, Code of Federal Regulations; 47CFR

part 2 sub-part J

• American National Standards Institute (ANSI)/ Institute of Electrical and Electronic

Engineers (IEEE) C95 1-2005

• Institute of Electrical and Electronic Engineers (IEEE) C95.1-1999 Edition

• International Commission on Non-Ionizing Radiation Protection (ICNIRP) 1998

• Ministry of Health (Canada) Safety Code 6. Limits of Human Exposure to Radio frequency

Electromagnetic Fields in the Frequency Range from 3 kHz to 300 GHz, 1999

• Australian Communications Authority Radiocommunications (Electromagnetic Radiation -

Human Exposure) Standard, 2003

• ANATEL ANNEX to Resolution No. 303 of July 2, 2002 “Regulation of Limitation of

Exposure to Electrical, Magnetic, and Electromagnetic Fields in the Radio Frequency

Range Between 9 kHz and 300 GHz” and “Attachment to Resolution #303 from July

2, 2002”

RF Exposu re Com pliance and Guidelines Operat ing I nst r uct ions

To comply with FCC RF energy exposure requirements, this Gateway transmitter

should be operated at a minimum separation distance of 55 cm from all persons.

For additional information on exposure requirements or other training information, visit

http://www.motorola.com/rfhealth

FCC Regulat ory I nform a t ion

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept

any interference received; including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device

pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses,

and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

7-2 68P09285A67- D

MAR 2008