User Manual

6
Desktop CPEi 150 User Guide
Front of CPE
The CPE unit contains an LED indicator at the top of the unit. The
LEDs provide the status of the unit and signal strength for easy
adjustment during setup.
LED Indicator Interface
Note: There is no reset button on this CPE unit. If you want to reset
the CPE, simply pull out the power cord and plug it in again.
Power Status
The LEDs are:
• On — power to the CPE is on.
• Off —power to the CPE is off.
Signal Strength
• If all LEDs on the bar are lit, full
signal is being received.
• If all LEDs are off, no signal is
being received.
• LEDs will display a chase
pattern when the device is
attempting to locate and connect
to the network.