User Manual

32
Advanced Configuration
Forwarding Tab
Click on the ADD button to create additional Port Fowarding rules.
Be sure to click the
Apply button once you have made changes.
Field or Button Description
Select
Select a box when you want to delete the spe-
cific row.
Protocol
Select TCP (Transmission Control Protocol)
or UDP (User Datagram Protocol).
WAN Port Start
Enter the beginning port range for external
network access.
WAN Port End
Enter the ending port range for external net-
work access.
LAN IP Address
Enter the IP address to host the service in the
dotted-decimal format.
LAN Port Start
Enter the beginning port range for internal
network access.
LAN Port End
Enter the ending port range for internal net-
work access.
Enabled
Check to enable specific port forwarding.