User Manual

14
Desktop CPEi 150 User Guide
The following buttons appear at the bottom of each configuration
page:
Button Descriptions
Status Use this menu to display network status,
including WiMAX, Internet, LAN and
Device Information
Port Forwarding Use this menu to enable Universal Plug
and Play (UPnP) Internet Gateway
Device (IGD) profile to allow certain
Windows applications to setup the port
forwarding rule dynamically when NAT
is enabled on this device.
Local Access Use this menu to display the IP Address
and netmask address in the local
network.
Control Panel Use this menu to manage the device
software.
Button Function
Apply Saves your changes. If you restart your
CPE without saving your changes, all
changes are lost. After the device
restarts, the last saved configuration is
used.
Undo Clears your changes on the current page
and returns to the main menu. Once you
click Apply, the Undo button will NOT
clear your changes.
Next Confirms the current setting and moves
on to the next screen