User's Manual

6-65
5
To install the bottom mounting brackets around the pole:
a Repeat steps 3a through 3c for the bottom set of clamps, threaded bolts, washers, lock
washers and nuts.
Note: To more easily shimmy the bottom bracket up the pole, fully install the left-most
threaded bolt, but leave the right most bolt loose. Once the bracket is in place, slide the bolt
through the side slot opening, then tighten the bolt using the washer, lock washer and bolt.
b To hold the base station tightly into the bottom MP2 clamp, make sure the base stations
flat washers, lock washers, and bolt are behind the clamp bracket.
c Tightly fasten the bolts into the base station, in order to securely hold the base station to
the bracket.