User's Manual

6-57
2
Attach the antenna bracket (MP4) to the L-shaped bracket (see Figure 6.7) To tilt the
antenna upward by 2 degrees, use the top set of holes to attach the antenna bracket to the
L-shaped bracket.
3 Attach the tilt guide bracket to the bracket on the antenna (see Figure 6.8):
a Align the holes on the side of the bracket with the holes on either side of the antenna’s
bracket.
b Insert a bolt through each hole, and tighten a nut and washer on each bolt to hold the
tilt guide bracket to the antenna.
4 Attach the tilt guide bracket (MP3) to the antenna bracket.Make sure the domed-side of
the washer faces the nut.
Figure 6.7 Attaching antenna bracket to the L-shape bracket
Top holes provide 2 degrees antenna uptilt
MP4
Figure 6.8 Attaching tilt guide bracket to the bracket on the antenna
Top of antenna