User's Manual

6-56 Configuring, Installing, and Using Carrier Infrastructure
Attaching lower antenna brackets to bolts on lower sides of
antenna
Attach the antenna brackets to the bolts on the left and right side of the antenna
(Figure 6.5). You must attach these brackets to the antenna bolts before attaching the
brackets to the base station.
Attach the bracket to the rear set of bolts on the antenna. The front bolts are NOT used
when installing the antenna onto the base station.
1 Attach the L-shaped brackets (MP2) to the upper left and right of the base station (see
Figure 6.6). You must attach these brackets first, so that your wrench can access the
screws holding the bracket to the base station.
Figure 6.5 Bracket on antenna bolt
Figure 6.6 Attaching L-shaped brackets to base station
MP2
Top of base station