Manualshelf

User's Manual

ManualsBrandsNokia Solutions and Networks ManualsElectronicsFixed Non-Line of Site Wireless Data Link
71727374757677787980
6-53
Attaching antenna cable to base station
To attach the antenna cable to the base station:
1 Attach the straight end of the antenna cable to the filter on the base station.
2 Apply weather proofing tape to the connector.
Note: For further information about the antenna connection, refer to “Connecting the
antenna to the base station” on page 6-73 in this chapter.
Determining the degree of tilt for the antenna
You can tilt the antenna downward or upward. To do so, you install the antenna mounting
brackets using the appropriate holes on the various brackets.
Figure 6.3 Attaching antenna cable to base station