User's Manual

4 Installing the low power base station
Attaching the LPB to a tower or pole
You can use clamps to mount the bracket to a tower or pole. Figure 2 shows the clamps
wrapped around a pole and screwed to the mounting bracket.
Note: You can also use the mounting bracket that ships with the OSU to attach the LPB to a
wall.
Two u-clamps on the back of the mounting bracket and 4 bolts hold the mounting bracket on
a pole or tower. The bracket, like the LPB itself, must be installed vertically.
To install the mounting bracket on a pole:
1 Slide the u-clamps on the back of the mounting bracket around the pole.
2 Insert the bolts through the openings in the back of the mounting bracket.
3 Screw the bolts into the u-clamps.
Figure 2 Mounting bracket and LPB mounted on pole